Dyna Glue

Dyna Glue

Industrial-strength epoxy adhesive gel for bonding concrete, wood, steel, fiberglass, Styrofoam and other materials.

Dyna Glue is a 1:1, non-shrinking epoxy adhesive gel designed for strong, durable bonding in industrial, commercial and repair applications. Its non-sag consistency allows it to be used on horizontal, vertical and overhead surfaces without running or creeping. DC Dynamis

Dyna Glue is well suited for bonding:

• Concrete and cement
• Steel and other metals
• Wood
• Fiberglass
• Styrofoam
• Masonry
• Industrial components
• Repair parts and assemblies
• Vertical and overhead surfaces

Strong, Non-Sag Bond

Dyna Glue cures to a translucent amber color and is formulated to resist shrinking, deforming or creeping after application.

Its gel consistency makes it especially useful where a conventional liquid adhesive would run or drain away from the bonding surface. No primer is normally required unless the surface is weak or highly porous. DC Dynamis

Working Time and Cure

Dynamis Epoxy uses 75°F as its standard room-temperature testing condition.

At 75°F:

• Mix ratio: 1:1 by volume
• Working time: approximately 20–25 minutes
• Sanding time: approximately 1–2 hours
• Full cure: approximately 7 days
• Mixed color: Translucent amber
• Shelf life: approximately 1 year in unopened containers

Warmer temperatures and larger mixed quantities will shorten working time, while colder temperatures will extend it. DC Dynamis

Durable Chemical and Environmental Resistance

Dyna Glue provides good resistance to water, salt water, alkaline exposure, organic solvents, foods and beverages, with fair resistance to mineral-acid spillage. DC Dynamis

For bonding, repair or application questions, contact Dynamis Epoxy, LLC at 800-828-8929 or 941-488-3999.