Z-TEC 753 Ceramic Epoxy Coating 2 LB Kit
Pump Repair
$171.56
Z-TEC-753 is a high performance, brushable, ceramic-filled epoxy for the repair, protection, and re-lining of pumps and process equipment. Z-TEC-753 is an extremely versatile, protective, high-build coating that may be applied to pump casings, fan blades, impeller blades, valves, other fluid circulating equipment, or any other equipment which may tend to be eroded by any abrasive particles….
Product Documents
Z-TEC 753 Ceramic Epoxy Coating
High-performance ceramic-filled epoxy finish coat for protecting pumps and industrial process equipment.
Z-TEC 753 is a 100% solids, high-build, brushable ceramic epoxy coating designed to provide a durable protective finish over properly prepared metal surfaces and over Z-TEC 752.
It is the brick-red finish coat in the Z-TEC 752/753 protective coating system and is commonly used on:
- Pump casings
- Impellers and impeller blades
- Fan blades
- Valves
- Water-circulating equipment
- Marine equipment
- Industrial process equipment
- Surfaces exposed to abrasion, erosion and corrosion
Durable Ceramic Finish
Z-TEC 753 provides excellent wear, impact and chemical resistance in demanding industrial and fluid-handling environments.
For equipment with deep pitting, erosion or substantial material loss, Z-TEC 751 Ceramic Epoxy Putty can first be used to rebuild the damaged surface before applying the Z-TEC 752/753 coating system.
Two-Coat Z-TEC System
For maximum protection, Z-TEC 752 is applied as the white base coat, followed by Z-TEC 753 as the brick-red finish coat.
The contrasting colors make it easy to visually confirm complete and uniform coverage of both coats.
Working Time and Performance
Dynamis Epoxy uses 75°F as its standard room-temperature testing condition.
At 75°F:
- Mix ratio: 1:1 by volume
- Working time: approximately 30–60 minutes
- Typical application thickness: 15–20 mils per coat
- 2-lb kit yield: approximately 29 cubic inches
- Mixed color: Uniform brick red
- Temperature resistance: up to approximately 350°F
Z-TEC 753 provides excellent resistance to water, salt spray, oils, fuel oil, alkalies and many commonly encountered industrial chemicals. In general, the Z-TEC 752/753 system performs well in water and alkaline environments, has fair resistance to acids, and is not recommended for strong solvent or concentrated-acid exposure.
For specific chemical-resistance, pump-repair or application questions, contact Dynamis Epoxy, LLC at 800-828-8929 or 941-488-3999.
| Weight | 3 lbs |
|---|---|
| Dimensions | 9 × 5 × 5 in |
Related products
Pump Repair
