Z-TEC 752 Ceramic Epoxy Coating 2 LB Kit
Pump Repair
$171.56
Z-TEC-752 is a high performance, brushable, ceramic-filled epoxy for the repair, protection, and re-lining of pumps and process equipment. Z-TEC-752 is an extremely versatile, protective, high-build coating that may be applied to pump casings, fan blades, impeller blades, valves, other fluid circulating equipment, or any other equipment which may tend to be eroded by any abrasive particles.
Z-TEC comes in two colors. The base or prime coat, Z-TEC-752, is white when mixed, and the top or finish coat, Z-TEC-753 is brick red. The color contrast is provided to help assure that two uniform coats are applied to all surfaces.
Product Documents
PDF Download
Z-TEC 752 Ceramic Epoxy Coating
High-performance ceramic-filled epoxy coating for the repair, protection and re-lining of pumps and industrial process equipment.
Z-TEC 752 is a 100% solids, high-build, brushable ceramic epoxy coating designed to protect equipment exposed to abrasion, erosion, corrosion and demanding fluid-handling environments.
Z-TEC 752 is the white base or prime coat in the Z-TEC 752/753 protective coating system and is commonly used on:
- Pump casings
- Impellers and impeller blades
- Fan blades
- Valves
- Water-circulating equipment
- Marine equipment
- Industrial process equipment
- Surfaces exposed to abrasive particles, erosion and corrosion
Ceramic Protection for Severe Service
Z-TEC 752 provides excellent wear, impact and chemical resistance and creates a tough protective barrier over properly prepared metal surfaces.
For equipment with deep pitting, erosion or substantial material loss, Z-TEC 751 Ceramic Epoxy Putty can first be used to rebuild the damaged surface before applying the Z-TEC 752/753 coating system.
Two-Coat Z-TEC System
For maximum protection, Z-TEC 752 is used as the white base coat, followed by Z-TEC 753, which cures to a brick-red finish.
The contrasting colors make it easy to visually confirm complete and uniform coverage of both coats.
Working Time and Performance
Dynamis Epoxy uses 75°F as its standard room-temperature testing condition.
At 75°F:
- Mix ratio: 1:1 by volume
- Working time: approximately 30–60 minutes
- Typical application thickness: 15–20 mils per coat
- 2-lb kit yield: approximately 29 cubic inches
- Mixed color: White
- Temperature resistance: up to approximately 350°F
Z-TEC 752 provides excellent resistance to water, salt spray, oils, fuel oil, alkalies and many commonly encountered industrial chemicals.
For specific chemical-resistance, pump-repair or application questions, contact Dynamis Epoxy, LLC at 800-828-8929 or 941-488-3999.
| Weight | 3 lbs |
|---|---|
| Dimensions | 9 × 5 × 5 in |
Related products
Pump Repair
